• 10/100/1000M Gigabit POE Fiber Media Converter, Full-power technology, Max.30W, Supports line speed switching of all ports, Duplex-fiber/Single-fiber optional, 0-120KM optional
                 

  • 10/100M Ethernet Fiber Switch included one fiber optic port and 4~24ports of 10/100M Ethernet, Fully compatible with IEE802.3, IEEE802.3u, Supports super jumbo frame etc.  
                 

         

  • Super mini in size, Support one channel digitalized analog video and one reverse RS485 data uncompressed high quality transmission, Auto PAL/NTSC/SECAM Compatible,0-100KM optional              

         

Product>PDH Optical Multiplexer>4E1 PDH Optical Multiplexer

4E1 Fiber Optical Transmitter and Receiver(4E1 PDH multiplexer)

Brief introduction

    DLX-OP04 4E1 fiber optical transmitter and receiver is a photoelectricity syncretic transmission apparatus with 120 channels (be equal to 120 voice channels). It takes GSI as core and provides E1 transmission which is suit to telecommunication. Offers 4 channels E1 ports, and one channel official telephone. one channel RS232,V.35,10/100base-t can been optional. Supports full network management function. It adapts to switch group network of small capacity, loop network, mobile communication (base station), special network, DDN and so on.

Feature

● Adopts large-scale integrate chip, brief circuit, low power consumption and high reliability structure

● Offers four channels E1 ports, and one channel official telephone

● Offers service telephone port for the convenience of installation and maintenance

● Possess the function of give a alarm by sound

● Provides one network management port, possess full concentrated network management function, convenient to configure the network and high security

● Possess complete alarm and state indication function

●Adopts manifold power supply: -48VDC or 220VAC

Specification

      Optical index

Wavelength

850nm/1310nm(Multi-mode),1260~1360,1470nm~1610nm (Single-mode)

Space of wavelength

20nm

Optical power

0 dBm ~ -3dBm/-5dBm ~ -10dBm

Number of fiber

One or two

Receiving Sensitivity

≤-36dBm

Connector

FC(SC/ST optional)

Transmission distance

20KM (maximum distance:120KM)

        E1

Line code

HDB3

Bit rate

2048KBIT/S±50ppm

Standard

ITU-TG.703

Line impedance

75ohm(unbalance),120 ohm(balance)

Connector

BNC for 75ohm, RJ45 for 120ohm

        RS232

Working manner

≤19.2KBIT/S asynchronous serial manner

Connector

RJ45

         Environmental

Operation temperature

-30℃~+50℃

Storage temperature

-40℃~+70℃

Relative humidity

0-95% Non-Condensing

MTBF

 ≥10e5 hours

Power Supply

DC 48V or AC 220V

         Physical Dimensions

19inch 1U type

480(L) x 140(W) x 45(H)mm


-----------------------------------------------------------------------------------------------------------------------------------------------------------

Types for order, Please find in the PDF file